Installation Requirements for APD 2000

 
ELECTRICAL SYSTEM
Power connection 230V single phase ±10%, 50 - 60 Hz
Maximum mains current 40 A
Main fuse 32 A
Maximum power consumption 5.5 kW
Ground terminal 6 mm˛
Power supply voltage fluctuation must not exceed 10%
COOLING WATER
Minimum flow rate 4 l/min
Maximum pressure 6 bars
Maximum inlet temperature 35° C(minimum depends on dew point)
If the flow rate is lower than 4 l/min, the safety circuit for protection of the X-ray tube is activated, disabling the X-ray generating circuit. When minimum conditions of flow-rate cannot be fulfilled, use the water chiller, available as an optional extra.
 
EXTERNAL DIMENSIONS

Total Weight: 290 Kg