 |
|
|
Features |
- On-board
microprocessor controlled via a PC RS232 serial port
- High frequency technology
- Low weight and compact size
- Automatic turnoff of the generator in the case of tube failure
- Temperature control in the high voltage tank and in the power section of the electronics
- Smoothed and controlled high voltage
- Control of the cooling water by a flow-switch
- Fail safe cooling water control using a measuring turbine
- Digital meters indicating kV and mA and related adjustable limit setting with precision potentiometers
- Overload protection for current and voltage with presetable threshold levels
- High level electronics to protect the X-ray tube
- Good price/performance ratio
- Easy maintenance
- Up to 4 shutter controls by RS232
|
|
|
|
|
|
|
|
|
The
lightest power supply for an X-ray source |
| The
compact 3K5 is one of the most reliable and efficient
X-ray source power supplies available. The modern
design, based on inverter technology gives operational
stability minus of 0.01 % (for 10% power supply
fluctuation) and has the additional advantages of low
weight (45 kg) and compact size. There are safety
devices, consisting of a warning light and the generator
power trips in the case of X-ray tube overheating. An
optional water chiller is available to cool the X-ray
tube and its generator.
Compact
3K5 in normally available in three versions (manual, PC
controlled via a PC serial port or both) and in three
configurations (standard 19” rack mountable, stand
alone cabinet and inserted in a working table with a
vertical or horizontal tube mount and a large working
area).
All
three Compact 3K5 generators have good flexibility and
adaptability. They have been designed to acclaimed
standards.
|
| |
|
|
Compact
3K5, in the 19” standard rack configuration, is
ready to be mounted into any system, independently
of its manufacturer, without needing to be adapted. |
| Compact
3K5, in the stand alone configuration, is
delivered with its own self-protected enclosure
and can be installed anywhere. |
|
|
|
Compact
3K5 is also available as a working table
configuration, on top of which is mounted its tube
shield, in either a vertical or a horizontal
position. |
|
|
|
|
|
|
|
| |
|
TECNICAL
DATA |
| Maximum
output voltage |
60
kV |
| Voltage
step width |
0.1
kV |
| Maximum
output current |
60
mA |
| Current
step width |
0.1
mA |
| Stability |
better than 0.01%
(with ±10% mains regulation) |
| Maximum
output power |
3
kW |
| Power
consumption |
5.5
kW |
| Start
up time |
20
s max. |
| High
voltage ripple |
<5% |
| Filament
supply |
5-12
V; 0-5 A |
| Safety
devices |
Water flow switch
Warning lamp
Cage interlock |
| Dimensions |
48.3
x 22 x 63 cm. (H x W x L) |
| Weight |
45
kg |
|
|
|
|
|
|
Installation
Requirements |
|
|
|
|
|
| ELECTRICAL
SYSTEM |
| Power
connection |
230V
single phase ±10%, 50-60 Hz |
| Maximum
mains current |
40
A |
| Main
fuse |
32
A |
| Maximum
power consumption |
5.5
kW |
| Ground
terminal |
6
mm˛ |
|
|
|
|
|
| COOLING
WATER |
| Minimum
flow rate |
4
l/min |
| Maximum
pressure |
6
bars |
| Maximum
inlet temperature |
35°
C (minimum depends on dew point) |
|
|
|
|
